Setting up Datio Point of Sale EMV chip card reader Vantiv Cloud IPP320

This article is to help you set up the Datio IPP320. To use the Datio IPP320, you need an account set up with WorldPay (AKA Vantiv) for Vantiv TriPOS Cloud. Please contact us at 408-643-0990 by text or support@datiopos.com by email for any help needed.

What is in the box:
1. Datio IPP320
2. Main cable
3. Wall power adapter

What else is needed:
1.  Ethernet cable
2.  Ethernet or LAN coupler

Connecting the Ingenico iPP320 terminal to your network

To ensure that your terminal is successfully connected to your network and powered on, you'll need to assemble your terminal, connect it to your network's router and plug it in a power outlet.


Make the connections:
Start by plugging the main cable to the Datio IPP320. In the picture below, this is Step 1. Then plug in the power adapter to the other end of the main cable, Step 2 below. Then plug in the coupler and ethernet cable to the main cable, Step3. Lastly, plug in the opposite end of the ethernet cable to your router.

Activation Code

After a few seconds, the terminal automatically powers on and an Activation Code displays on it's white idle screen.

Activation Code

Set up the Datio IPP320 in the Datio POS iPad Application:

Go to your iPad, open the Datio App. Go to Extras\Custom SetUp\EMV. Turn on the Ingenico IPP320. Enter the Activation Code you found in the previous step. Then select SAVE. Please note you can only use one of the EMV options below.

Continue the setup in the App:

Add an item to the cart, select Total to check out, and then select Credit. Please be very patient when the first item is added, as the Datio IPP320 will download some files which can take up to 5-10 minutes. After the first item, you won't have the file download delay.

Continue with test transaction:

The Datio IPP320 should now say "Datio POS". Insert EMV cards into the bottom of the unit for payment. Remove card when the unit tells you to. Apple, Android and Samsung pay will also work.

IMPORTANT note for restaurants: For debit cards when asked for PIN, simply do not enter the PIN and push the Green button to continue without PIN.

Basic flow is as follows: add item(s) to cart, select Total to check out, select credit, insert card or tap phone for Apple, Samsung or Android Pay. Look for the remove card and Approved messages. When the transaction was successful you will see "Choice of Receipt." Pick the receipt type, text or print.

Any questions please text or call us at 408-643-0990 or email support@datiopos.com.

Lockdown to use Datio POS app only on the iPad

You can lock down the iPad to run Datio POS app only by following few quick steps. This keeps your sales staff focused and using only the Datio POS app on the iPad. You can enable this by enabling Guided Access on your iPad.

• Launch the Settings app on your iPad.
• Tap on General, Accessibility, Guided Access under the Learning section. Tap the switch turn on Guided Access.
• Tap on Passcode Settings to set Guided access passcode.
• Toggle Accessibility Shortcut to On. 
• Now run Datio POS app and triple-click the Home button to enter and exit Guided Access at any time.