The Datio POS Retail and Quick Service App Version greater than 1.20.10 and Full Service Restaurant Version Greater than 2.4.5 have the ability to update the firmware that controls the Base Station. The firmware upgrade from 9.011 (9.11) to 10.09 (10.9) speeds printing and in some cases improves the stability of the connection between the iPad and Base Station. It is best to keep the Datio App and Firmware updated.
To update your Firmware. First check if your version is more than 1.20.10 or 2.4.5 by going to extra and reading the version after the V such as V1.20.10.
Next go to CUSTOM SETUP, HARDWARE then BASE STATION FIRMWARE UPGRADE.
Next you will see the message "Your current version is 9.011 or 10.09 or newer, please do not close the App or turn off or unplug the base station, Ok." Hit "Ok" to update. Give the Firmware time to update.
You will then see a message "Firmware update successfully, ok."
FIRMWARE is now updated, thank you.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.